Dow SYLGARD™ 567 Primerless Silicone Encapsulant Black 200 mL Kit

Part number: PF567200
Dow SYLGARD™ 567 Primerless Silicone Encapsulant Black 200 mL Kit
Quantity Price
1 $148.49 148.490000000 USD New Limited Availability PF567200
2-8 $114.34 114.340000000 USD New Limited Availability PF567200
9+ $106.17 106.170000000 USD New Limited Availability PF567200
We are currently experiencing delays from this supplier. Lead times may vary as product becomes available. Non-returnable product. Canceled orders may incur a fee at the supplier's discretion.
  • A Made in the USA

Dow SYLGARD™ 567 Primerless Silicone Encapsulant Black is a two component material that is used in potting applications for automotive assemblies, power supplies, high voltage resistor packs, LED lighting, industrial controls, and connectors. It offers unprimed adhesion, heat curing, flowability, minimal shrinkage, low viscosity, and good dielectric properties. 200 mL Cartridge.


This is a Dow product repackaged by KitPackers, an authorized repackager of Dow.


Please note mixer will not be shipped with this product. Review related products below and purchase separately.

<p>Dow&nbsp;SYLGARD&trade; 567 Primerless Silicone Encapsulant Black is a two component material that is used in potting applications for automotive assemblies, power supplies, high voltage resistor packs, LED lighting, industrial controls, and connectors. It offers unprimed adhesion, heat curing, flowability, minimal shrinkage, low viscosity, and good dielectric properties. 200 mL Cartridge.</p> <p><br />This is a Dow product repackaged by KitPackers, an authorized repackager of Dow.</p> <p><br /><span style="color: #ff6600;">Please note mixer will not be shipped with this product.&nbsp;Review related products below and purchase separately.</span></p>
Typical Use: Low cost primerless adhesion; encapsulation, protection of electrical/electronic devices.
Brand: SYLGARD
Color: Black
Components: 2 part
Cure System: Heat
Cure Time: 120min @ 100 °C; 60min @ 125 °C; 15min @ 150 °C
Dielectric Strength: 525 V/mil
Hardness: 42 A
Key Specifications: MIL-PRF-23586F (Grade B2), Type I, Class IV, QPL, UL 94 V-0 If you require manufacturer certification to a certain spec, please request a quote as additional fees may apply. Ellsworth Adhesives is an ISO-9001 registered and AS9120 compliant distribut
Mix Ratio: 1:1 by volume; 1:1 by weight
Service Temperature: -45 to 200 °C
Shear Strength: 140
Specific Gravity: 1.23
Thermal Conductivity: 0.3 W/mK
Viscosity: 1,540
Volume Resistivity: 2.1 x 10^15 ohm-cm
Working Time: >3d @ room temperature

 

This site uses cookies

We use cookies to provide you with the best possible experience. By using this site, you accept our terms of service and use of cookies.