Print
Email
Part number: 164 SIL ELAST PT A 24.9KG
Manufacturer SKU: 4013032
Dow SYLGARD™ 164 Silicone Elastomer Gray is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides good flowability, thermal conductivity, and flame resistance. 1:1 mix ratio. Part A, 24.9 kg Pail.
| Typical Use: | General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays. |
| Brand: | SYLGARD |
| Color: | Charcoal Gray |
| Components: | 2 part |
| Cure System: | Room Temperature |
| Cure Time: | 35min @ 25 °C |
| Dielectric Strength: | 19 kV/mm |
| Flash Point: | >101.1 °C |
| Hardness: | 61 A |
| Mix Ratio: | 1:1 by volume; 1:1 by weight |
| Service Temperature: | -45 to 200 °C |
| Specific Gravity: | Part A: 1.58 @ 25 °C; Mixed: 1.57 |
| Thermal Conductivity: | 0.64 W/mK |
| Viscosity: | Part A: 4,400; Mixed: 8,925 |
| Volume Resistivity: | 1.1 x 10^13 ohm-cm |
| Working Time: | 14min @ room temperature |
-
$969.71Display Quantity PricingPart #: 164 SIL ELAST PT B 24.9KG -
-
$871.78Display Quantity PricingPart #: 160 SIL ELAST PT A 24.9KG -
$1,187.33Display Quantity PricingPart #: 170 SIL ELAST PT A 22.6KG -
$1,576.35Display Quantity PricingPart #: 170 FAST CURE A 22.6KG
